Description
- Made by «mid SAPS» technology, has a low content of sulfate ash, phosphorus and sulfur and provides an increased resource of catalysts and soot filters (DPF — Diesel Particulate Filter);
- Provides reliable lubrication and protection of engines with high specific power, including multi-valve, turbocharged, intermediate cooling of the injection air, direct injection;
- Suitable for diesel engines with a injection system (Common Rail) and a injection pump system (Pumpe-Düse), meets the requirements of VW 505.01;
- Especially recommended for Opel and Mercedes Benz car engines with soot filters that meet the requirements of Euro – 4, -5 and -6;
- Provides extremely good protection against wear, rust and oxidation, and special attachments maintain the purity of the engine from dirt, sludge and deposits, even at increased replacement intervals;
In an engine with a run of oil XADO Luxury Drive due to its regeneration ability eliminates and treats surface defects.
Requirements and tolerances
Meets the requirements of specifications and automakers:
|
SAE 5W-30 |
SN/SM/CF API |
|
ACEA C3 |
Renault RN17 |
|
VW 505.01/505.00 |
MB 229.51/229.52/229.31 |
|
BMW Longlife-04 |
GM dexos 2 |
|
OV0401547 |
|
Detailed characteristics:
You need to know before use
Application
The use of XADO Luxury Drive oils in the new engine provides optimal working ( without loss of metal in the chips) and retains its ideal condition throughout the service life.
Due to the presence of REVITALIZANT® compensates for the current wear of nodes and engine parts, supports the parameters of its operation (compression, power and economy ) at the highest level. RF (Revitalization® factor) – an indicator of the efficiency of recovery and protection of the engine from wear. RF=15.5 indicates that its protective and reducing properties are almost three times higher than XADO Atomic Oil.
Notes
When using oils, take into account the recommendations of the car manufacturer.
Technical information *
| Density at 20 ° C, kg/l | 0.850 |
| Viscosity at 100 ° C, mm2 /s | 12 |
| Viscosity at 40 ° C, mm2/s | 71 |
| Viscosity at -30 ° C, mPa s | 5590 |
| Viscosity index | 170 |
| Flash temperature, ° C | 200 |
| Freezing temperature, ° C | -39 |
| Sulfate ash content, mass.% | 0.78 |





Reviews
There are no reviews yet.