MOTUL Auto Engine Cleaner Additive 300ML
- Cleaning additive for the entire oil circuit
- Added directly to the lubrication circuit
- Reduces fuel consumption and removes deposits and debris
- Clean effectively dissolves contamination
- Mixed with the oil for easy removal during the oil change
50.00 AED
Out of stock
Description
PERFORMANCES
MOTUL ENGINE CLEAN, added to engine oil before draining, allows to:
• reduce the wear
• decrease oil and fuel consumption
• increase engine compression on all cylinders in the same way
• decrease exhaust pollutants emissions
• evacuate deposits, varnishes and other combustion residues from sensitive areas such as hydraulics lifters or piston
grooves and rings
• take maximum benefit of fresh oil which will fill engine after draining
• increase catalytic converter’s, GPF’s and DPF’s lifetime
RECOMMENDATIONS
Before each oil drain, add in the engine a can of MOTUL ENGINE CLEAN to hot used oil. Let the engine run at idle for 15 minutes. Drain the oil and change the oil filter.
The content of one can is sufficient for an oil capacity up to 5 litres. For higher capacities, 60 ml of ENGINE CLEAN is to be added per additional litre of engine oil (over 5 litres). Do not exceed the recommended proportion. If necessary, proceed to 2 successive treatments.
Combined with fuel cleaner products such as VALVE & INJECTOR CLEANER or SYSTEM KEEP CLEAN, the pre-drain additive ENGINE CLEAN provides a very sensitive reduction of pollutants emissions to pass Vehicle Inspection.
MOTUL ENGINE CLEAN, added to engine oil before draining, allows to:
• reduce the wear
• decrease oil and fuel consumption
• increase engine compression on all cylinders in the same way
• decrease exhaust pollutants emissions
• evacuate deposits, varnishes and other combustion residues from sensitive areas such as hydraulics lifters or piston
grooves and rings
• take maximum benefit of fresh oil which will fill engine after draining
• increase catalytic converter’s, GPF’s and DPF’s lifetime
RECOMMENDATIONS
Before each oil drain, add in the engine a can of MOTUL ENGINE CLEAN to hot used oil. Let the engine run at idle for 15 minutes. Drain the oil and change the oil filter.
The content of one can is sufficient for an oil capacity up to 5 litres. For higher capacities, 60 ml of ENGINE CLEAN is to be added per additional litre of engine oil (over 5 litres). Do not exceed the recommended proportion. If necessary, proceed to 2 successive treatments.
Combined with fuel cleaner products such as VALVE & INJECTOR CLEANER or SYSTEM KEEP CLEAN, the pre-drain additive ENGINE CLEAN provides a very sensitive reduction of pollutants emissions to pass Vehicle Inspection.
Reviews
There are no reviews yet.