WURTH A/C Duct Disinfection Foam & Quick Fresh

Description

Step-by-Step Application Guide

STEP 1: A/C Duct Disinfection Foam Application

•Turn off the engine and ensure A/C is off.

• Shake the can well.

• Insert the included probe into each air vent and discharge the foam evenly.

• Wait 5 minutes to allow the foam to expand and clean inside the ducts.

• Start the engine and switch on the A/C to recirculation mode.

• Close all windows and doors, and let the system run for 10 minutes.

• Turn off the system and open the doors to ventilate the car.

STEP 2: Quick Fresh Application

• With the engine running, turn on the A/C in recirculation mode.

• Place the Quick Fresh can upright on the passenger footwell mat, aimed toward the intake duct, tilted at approx. 30°.

• Press the nozzle for full discharge and exit the vehicle immediately.

• Keep doors and windows closed for 20 minutes while the mist circulates.

• Open all doors and let the cabin air out thoroughly.

Vehicle air conditioning system and passenger compartment cleaning and sanitisation kit.

Convenient kit

Consists of 1 A/C duct disinfection foam and 1 Newtrol A/C for odour neutralisation.

Cleaning and disinfection of the A/C system and passenger compartment

Prevents respiratory problems and allergies due to contamination by bacteria, germs or other micro-organisms.

Single dose per vehicle

Easy accounting of vehicle cleaning costs.

Quick and cost-effective application

No need to disassemble air conditioning system componentsand both packages are simple and quick to apply: Foam with probe for application through the fans and Newtrol withspecial full discharge valve.

Recommended vehicle sanitisation

This cleaning and disinfection service should be doneapproximately twice a year.