WAGNER Radiator Cleaner RC1 250ML
Standard cleaner for radiator circuits and heat exchangers. Removes corrosion and mineral deposits, limescale and other non-oil-related contaminants from cooling circuits and heat exchangers.
Non-foaming, highly active cleaning and dissolving substances infiltrate corrosion and deposits and dissolve them completely in coolant (or water). By subsequently draining the liquid, these contaminants are completely flushed out of the cooling system.
60.00 AED
Description
Advantages:
• Reliably and safely removes stubborn limescale, mineral and corrosion deposits
• Impurities are completely dissolved in coolant (or water) and discharged
• Avoids damage caused by overheating, ensures optimal cooling and function
• Compatible with all common antifreeze
• Easy handling
• Neutral to all common sealing materials
• No negative effects on water pumps, thermostats and valves
• High cost savings due to no need for disassembly
• Extends service life
Application:
Drain cooling water and top up cooling system with water and radiator cleaner RC1. Warm up the engine and open the heating valve. After reaching the operating temperature, drive/operate for at least 15 minutes in the medium speed range.
The total exposure time should be 24 hours, during which time you can drive. Then rinse the cooling system thoroughly 2x with clear water and fill it according to the manufacturer’s instructions. Remove expansion tanks that do not flow through and clean them by hand. In case of extreme deposits or repeat the process if necessary.
Caution! Contains acid – do not leave in the system for longer than the recommended 24 hours!
Miscible with all commercially available coolant fluids and antifreeze and sufficient for cooling systems with 5 – 15 litres of cooling water.
Reviews
There are no reviews yet.