WAGNER Radiator cleaner for oil-contaminated cooling circuits 200ML
Special cleaner for thorough cleaning of oil-contaminated cooling circuit systems and heat exchangers. Removes oily deposits and sludge, e.g. after cylinder head gasket damage.
Non-foaming, highly active surfactant and emulsifier combinations dissolve and emulsify existing oil and oil deposits completely into coolant (or water) – by subsequently draining the liquid, these contaminants are completely flushed out of the cooling system.
60.00 AED
Description
Advantages:
• Reliably and safely removes stubborn oil deposits and sludge
• Impurities are completely emulsified in coolant (or water) and discharged
• Avoids damage caused by overheating and ensures optimal cooling and function of the circuit
• Compatible with all common antifreeze
• Easy handling
• Neutral to all common metals and sealing materials
• No negative impact on water pumps, thermostats and valves
• High cost savings due to saving disassembly
• Extends service life
Application:
Drain contaminated cooling water and fill cooling system with water and the radiator cleaner for oil-contaminated circuits.
Warm up the engine and open the heating valve. For optimal cleaning, drive/operate for about 15 minutes in the middle speed range, then drain the fluid. Remove expansion tanks that do not flow through the cooling circuit and clean them by hand. In case of extreme soiling or if necessary, repeat the process.
Then rinse the cooling system thoroughly with clean water and fill it according to the manufacturer’s instructions.
Miscible with all commercially available cooling water liquids and antifreeze, sufficient for cooling systems with 5 – 15 litres of cooling water volume.
Reviews
There are no reviews yet.