WURTH Polish high cut P1
Application areaIdeal for all clear coats and paint finishes.
InstructionsClean the surface thoroughly before applying the polish. To start polishing, use a green hard foam pad or wool pad. Apply a small amount of polish to the surface to be polished. If the polishing pad is new, we recommend applying the compound to the surface as well and pre-polishing. Polish with a rotary polisher at an optimum speed of 1,200-1,600 rpm, applying light to medium pressure. Remove residue with a 500 g microfibre cloth.
Description
Polish suitable for all types of varnishes and paints used in the automotive sector, including hard, swirl-resistant varnishes.
- Water-based formula that doesn’t dry out like other compounds.
- Removes the marks from 1,500 grit sandpaper or finer.
- Removes paint defects, swirls, adhered dust and scratches.
- Doesn’t damage the transparent layer during use.
- Free from solvents and silicone.
- Generates almost no dust during polishing.
- The pads stay cleaner for longer.
- Ideal for use with a wool or green hard foam pad.
Technical data
- Contents: 1 kg
- Cut level: 9 out of 10
- Gloss level: 6 out of 10
- Pad required: Hard green pad 00585 170 001
- Speed (minimum-maximum): 1,200-1,600 rpm
NoticeDo not apply if the surface is hot or exposed to the sun.
Reviews
There are no reviews yet.