WURTH Anti-hologram polish P2
Application areaIdeal for all clear coats and paint finishes.
Instructions
Clean the surface thoroughly before applying the polish. To start polishing, use a blue semi-hard foam pad or wool pad. Apply a small amount of polish to the surface to be polished. If the polishing pad is new, we recommend applying the compound to the surface as well and pre-polishing. Polish with a rotary polisher at an optimum speed of 1,200-1,600 rpm, applying light to medium pressure. Remove residue with a 500 g microfibre cloth.
Description
Polish suitable for all types of varnishes and paints used in the automotive sector, including hard, swirl-resistant varnishes. Designed to remove holograms and moderate swirl marks.
- Water-based formula that doesn’t dry out like other compounds.
- Removes the marks from 2,000 grit sandpaper or finer
- Removes holograms from paint, acid rain, swirls and dust marks.
- Technology that polishes and brightens at the same time.
- Free from solvents and silicone.
- Generates almost no dust during polishing.
- The pads stay cleaner for longer.
- Ideal for use with a wool or blue semi-hard foam pad.
Technical data
- Contents: 1 kg
- Cut level: 8 out of 8
- Gloss level: 8 out of 8
- Pad required: Semi-hard blue pad 00585 170 002
- Speed (minimum-maximum): 1,200-1,600 rpm
NoticeDo not apply if the surface is hot or exposed to the sun.
Reviews
There are no reviews yet.