BLINKER Pressurized Joint Silicone 200ML
INSTRUCTIONS FOR USE:
- The surfaces must be clean, dry, free from grease, dust, frost, and all contaminants that could reduce adhesion.
- The minimum width of the join must be 6 mm.
- After using, leave a small trace of silicone, which will serve as a cap. To continue applying, extract the silicone cap.
- This silicone sealant cures by reaction with the humidity in the air. Keep the container hermetically sealed when not in use. A plug may form at the tip of the tube or cartridge during storage. This can be easily removed and does not affect the remainder of the contents.
60.00 AED
Description
SPECIFICATIONS:
Acetic silicon sealant that prevents humidity.
Adheres strongly to a large variety of non-porous substrates such as glass, ceramic tiles, aluminium and metal.
100 % polymer silicone.
Hight strength. Solvent-free.
Resistant to ozone, ultraviolet radiation and extreme temperatures.
Easy to apply.
Acetic-cure system. Cures at room temperature when exposed to humidity of the air.
Cap with fine thread to better preserve the product after use. Interchangeable cannula for any type of cannula for
single-component adhesives/sealants in cartridges (silicones, polyurethanes, MS polymers, etc.) to obtain joints
with the desired shape. (Ref. 045364, 045367, 045368).
APPLICATIONS:
Specially suitable for application on joints exposed to high temperatures, oil pumps, water pumps, thermostats,
cylinder head covers, crankcases, differentials, gearboxes, etc.
Suitable for sealing windows, revising pumps, sealing leaks, glueing, etc.
Can be used for any form of joint, including on vertical surfaces.
Totally dry after approximately 24 hours.
Resistant to oils, steam, water, gas, greases, antifreeze and for a short time to fuel.
Reviews
There are no reviews yet.